Bagman (STERN - Valadon automation) source code released

VHDL source code for DE1, DE2 and DE0 Nano available at https://sourceforge.net/projects/darfpga

Crazy Kong (Falcon) VHDL source code available

VHDL source code for DE1, DE2 and DE0 Nano available at https://sourceforge.net/projects/darfpga

FPGA64 for DE0 nano, DE1 and DE2 source code not available

Source code for the FPGA64 for Terasic board DE0 nano, DE1 and DE2 are not available at the moment.

C64 IEC interface schematics for DE0 nano, DE1 or DE2 board

IEC interface components :

• 1 TTL 74LS06  six open collector buffer inverter
• 6 resistors 2 kOhms  

Gpio side : 

• connect to gpio_0 for DE0 Nano
• connect to gpio_1 for DE1 or DE2

IEC side :

• to IEC/SD board
• to 1541 drive din connectors (+5V not connected )

FPGA64 for DE0 Nano, DE1, DE2-35

Keyboard main keys :

• F11 toggle joystick emulation port A or port B on numeric keypad.
• F12 toggle PAL / NTSC (some VGA monitor doesn't synched at 50Hz )

DE0 Nano switch :

• key0 reset cpu
• gpio_1_in0 toggle PAL / NTSC mode at startup (use F12 after startup)
• gpio_1_in1 toggle15KHz (RBG SCART) / 31KHz (VGA)

DE1 switch :

• key0 reset cpu
• sw6 toggle PAL / NTSC mode at startup (use F12 after startup)
• sw9 toggle 15KHz (RBG SCART) / 31KHz (VGA)  

DE2 switches :

• key0 reset cpu
• sw1 toggle PAL / NTSC mode at startup (use F12 after startup)
• sw0 toggle 15KHz (RBG SCART) / 31KHz (VGA)  

 JiffyDos shortcut :

• /FB load file browser from IEC drive
• run 
• @cd< goes out of D64 (< is the left arrow symbol not the 'less than' symbol)
• @cd/ goes up one dir level
• @cd// goes to root dir

New PCB for DE0 nano : low cost Multi I/O

On the PCB

• Video DAC : RGB 3x4 bits, Hsync, Vsync ready for VGA 31KHz or RGB SCART 15KHz, 50/60Hz.
• Audio DAC :   PWM stereo.
• PS2 protocol (on PS2 plug or USB plug )
• micro SD card socket
• 2 inputs and 10 input/output with protection diodes (5v tolerant)

2 spare PCBs available

• 20€ pcb alone (no components)
• 35€ with surface mount components and sd socket (no connectors)

 Connected  to DE0 with straight ribbon cable

Hardware for DE0 Nano / DE2 board

On the breadboard : 

• Video DAC : RGB 3x3 bits, Hsync, Vsync ready for VGA 31KHz or RGB SCART 15KHz, 50/60Hz.
• Audio DAC :   PWM stereo.
• PS2 input only

Green PCB plugged on the DE0 Nano GPIO connector :

• SRAM + IEC interface

SRAM + IEC interface for DE0 Nano or DE2 GPIO

• SRAM 512Kx8, 10/12ns
•  IEC interface 3 bits (data, clk, atn), 3.3/5.0v converter, usable with original drives (1541...) or with modern IEC/SD replacement.

2 spare SRAM + IEC PCBs available

• 20€ pcb only (no components)
• 30€ with surface mount components (no connectors)

uIEC/SD plugged in :

Full configuration with external wiring :

• SUBD 15 pin HD for video, VGA via standard cable, specific cable required for SCART
• Jack 3.5 stereo for audio
• USB for keyboard (use PS2 keyboard ONLY)